Difference: FkwSTEP09GlideinWMS (4 vs. 5)

Revision 52009/06/06 - Main.FkW

Line: 1 to 1
 
META TOPICPARENT name="FkwGlideinWMS"
Line: 97 to 97
 

glidein-frontend

The web based monitoring for the frontend is here.
Added:
>
>
Email from Igor:
Hi Frank.

The factory is installed at
gfactory@glidein-1.t2.ucsd.edu:/home/gfactory/glideinsubmit/glidein_STEP09_v1

All operations need to be done as used gfactory, in that directory.

To start the factory:
./factory_startup start
To stop the factory:
./factory_startup stop

To reconfig the factory, edit
../glidein_STEP09_v1.cfg/glideinWMS.xml
then
./factory_startup reconfig ../glidein_STEP09_v1.cfg/glideinWMS.xml

To see if the factory is in downtime:
./factory_startup statusdown factory
Put the whole factory in downtime
./factory_startup down factory
Re-enable the factory
./factory_startup up factory

To see which entries are in downtime:
./factory_startup statusdown entries
Put an entry in downtime
./factory_startup down 
Re-enable an entry
./factory_startup up 

See what is going on with the factory
~/glideinWMS/tools/wmsTxtView.py
or on Web at
http://glidein-1.t2.ucsd.edu:8319/glidefactory/monitor/glidein_STEP09_v1/factoryStatus.html

Igor

 That's all I know so far about it!

glidein-collector

 
This site is powered by the TWiki collaboration platformCopyright © by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding TWiki? Send feedback